These instructions help you configure your NEC Aspire phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.
<a id="Configure the SMDR output"></a> |
Follow the steps below to configure the SMDR output on your NEC Aspire:
To configure SMDR output by serial port, apply the following settings for each system adapter:
| Adapter | Programming code | Value | Description |
|---|---|---|---|
| NTCPU - Serial | 10-21-02 | 1 | NTCPU Hardware Setup - Baud Rate for COM Port. Choose the baud rate from the three available options: 0 = 4800, 1 = 9600, and 2 = 38400 |
| 35-01-01 | 1 | SMDR Options - Output Port Type | |
| CTA/CTU - Serial | 15-02-19 | 1 | Multi-Line Telephone Basic Data Setup - CTA/CTU Data Communication Module |
| 15-02-20 | 1 | Multi-Line Telephone Basic Data Setup - Baud Rate for CTA/CTU port. Choose from the three available options: 0 = 4800, 1 = 9600, and 2 = 38400 | |
| 35-01-01 | 4 | SMDR Options - Output Port Type | |
| 35-01-02 | Extension number that the CTA/CTU adaptor is attached to. | SMDR Options - Output Destination Number |
Apply the following settings in the programming sections below:
| Programming code | Value | Description |
|---|---|---|
| 14-01-06 | 1 | Basic Trunk Data Setup - SMDR Print. |
| 15-01-03 | 1 | Basic Extension Data Setup - SMDR Print. |
| 35-01-03 | 0 | SMDR Options - Header Language. |
| 35-01-04 | 0 | SMDR Options - Omit (Mask) Digits. |
| 35-01-05 | 0 | SMDR Options - Minimum Number of SMDR Digits. |
| 35-01-06 | 0 | SMDR Options - Minimum Call Duration. |
| 35-01-07 | 0 | SMDR Options - Minimum Ringing Time. |
| 35-01-08 | Default | SMDR Options - SMDR Format. |
| 35-02-01 | 0 | SMDR Output Options - Toll Restricted Call. |
| 35-02-02 | 1 | SMDR Output Options - PBX Calls. |
| 35-02-03 | 1 | SMDR Output Options - Display Trunk Name or Numbers. |
| 35-02-04 | 0 | SMDR Output Options - Daily Summary. |
| 35-02-05 | 0 | SMDR Output Options - Weekly Summary. |
| 35-02-06 | 0 | SMDR Output Options - Monthly Summary. |
| 35-02-08 | 1 | SMDR Output Options - Incoming calls. |
| 35-02-09 | 0 | SMDR Output Options - Print Name or Numbers. |
| 35-02-10 | 0 | SMDR Output Options - All Lines Busy (ALB) Output. |
| 35-02-12 | 0 | SMDR Output Options - DID Table Name Output. |
| 35-02-13 | 1 | SMDR Output Options - CLI Output when DID to Trunk. |
| 35-02-14 | 1 | SMDR Output Options - Date. |
| 35-02-15 | 1 | SMDR Output Options - CLI/DID Number Switching. |
| 35-02-16 | 1 | SMDR Output Options - Print Trunk Name or Received Dialled Number. |
| 35-02-17 | 0 | SMDR Output Options - Print Account Code or Caller ID Name. |
| 35-02-18 | Default | SMDR Output Options - Caller ID Name Output Method. |
| 80-05-01 | 1 | Date Format for SMDR and System Reports. |
<a id="Install NetPBX"></a> |
To capture SMDR data from your NEC Aspire using a serial connection, you first need to install the NetPBX software to collect the data from the serial port and send it to TIM Enterprise. For setup instructions, click on the link below:
<a id="Configure TIM Enterprise"></a> |
Once NetPBX is configured and collecting data, log in to TIM Enterprise and perform the following steps: