These instructions help you configure your Unify OpenScape Busines phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Configuring the SMDR output

Enabling the SMDR output

Follow the instructions below to configure the SMDR output in your phone system. These instructions are taken from the Unify OpenScape Busines manual:

1. Log on to OpenScape Business Assistant and click on -> -> , as shown below:
   
2. Click to start the wizard.
3. In the new window that opens, tick the to enable the CDR output, as shown below:
   

Configuring TIM Plus

Follow the steps below to configure TIM Plus to collect SMDR data from your telephone system:

1. Click on the Directory tab.
2. Choose the site you want to configure and click Properties.
   
3. In the Site Properties window, select Unify OpenScape Business from the PBX model drop-down list.
4. In the Connection method field, select Actively connect to PBX from the drop-down list.
5. In the Host field, enter the IP address of your telephone system.
6. In the Port field, enter the port number configured in your telephone system.
7. Leave the Username and Password fields blank.
8. In the Connection script field, select Unify OpenScape Business from the drop-down list.
9. Click on the Save button to apply the settings.