These instructions help you configure your Mitel MiVoice 400 Series phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Configure the SMDR output"></a>

Configuring the SMDR output

The screenshots below display how the Mitel MiVoice 400 Series should be configured:

Setting the SMDR format to PC5 

Setting the SMDR format to TCP/IP

OIP Server and TIM Enterprise

The OIP Server has a very basic call logging module. If you intend to install TIM Enterprise alongside the OIP Server, you need to uninstall the call logging module from the OIP Server suite, otherwise, when configuring your Mitel to output the data to the PC running TIM Enterprise, the OIP Server will overwrite some of the required settings.

<a id = "Configure TIM Enterprise"></a>

Installing NetPBX

If your Mitel MiVoice 400 Series has been configured to send SMDR data via a serial connection, you first need to install the NetPBX software to collect the data from the serial port and send it to TIM Enterprise. For setup instructions, click on the link below:

Install and configure NetPBX

<a id = "Configure TIM Enterprise"></a>

Configuring TIM Enterprise

Once NetPBX is configured and collecting data, log in to TIM Enterprise and perform the following steps:

1. Click on the Directory tab.
2. Locate the PBX object you want to configure in the Directory, right-click on it and select Properties.
3. A new window will open, displaying the general properties of your PBX object. Select Aastra PC5 from the Data format list and tick the  box, as shown below:
   
4. Click on the Connection tab and select No connection required from the Connection method list.
5. Click on the Save button to apply the settings