Samsung iDCS - Serial connection

These instructions help you configure your Samsung iDCS phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Enterprise establishes a serial connection with this PBX.

Support Files

  Samsung DCS.TDT
  Samsung DCS.TDS

Required Tasks

  Configure the SMDR output
  Install NetPBX
  Configure TIM Enterprise

Configuring your SMDR output

Follow the instructions below to configure your Samsung iDCS to output SMDR data to TIM Enterprise.

1. Log in to the Samsung Installation Tool software.
2. Click on the 5. Features option from the left-hand menu.
3. Click on the 5.6 System I/O Options tab and select 5.6.2. LAN Printer.
4. In the LAN Printer options configure the entries in the SMDR column, as shown below:
   
   
5. Click on the Save icon to save the settings.
6. Click on the 5.6.3. SMDR Options tab and configure the following settings:
   
   
7. Click on the Save icon at the top of the window to save the settings.

Installing NetPBX

The Samsung iDCS phone system can send its SMDR data via a serial connection. To collect the data from the serial port and send it to TIM Enterprise, you first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

Configuring TIM Enterprise

Once NetPBX is configured and collecting data, log in to TIM Enterprise and perform the following steps:

1. Click on the Directory tab.
2. Locate the PBX object you want to configure in the Directory, right-click on it and select Properties.
3. A new window will open, displaying the general properties of your PBX object. Select Samsung DCS from the Data format list and tick the Keep a local backup of data box, as shown below:
   
   
4. Click on the Connection tab and select No connection required from the Connection method list.
5. Click on the Save button to apply the settings.