...
| Step | IOS commands | Description |
|---|---|---|
| 1 | enable | Enter EXEC mode, enter password if requested. |
| 2 | conf t | Enter global configuration mode. |
| 3 | aaa new-model | Enable aaa accounting mode. |
| aaa accounting connection h323 start-stop group RADIUS | ||
| gw-accounting aaa | ||
| acct-template callhistory-detail | ||
| 4 | RADIUS-server host 192.168.1.1 auth-port 1645 acct-port 1612 | Specifies the IP address to send CDR data. Where '192.168.1.1' is the machine running TIM Plus. |
| 5 | RADIUS-server key C1sco | Specifies the RADIUS authentication secret as 'C1sco' as configured above. |
| 6 | RADIUS-server vsa send accounting | Enables VSA events. |
| 7 | end | Exit configuration mode. |
| 8 | wr | Save changes. |
Configuring TIM Plus
Configuring Cisco AXL sync
Below you will find steps on how to configure the Directory Sync from Cisco UCM:
- Browse to TIM Plus as normal and login with your credentials.
- Click on the tab.
- Click on the site configured during the setup wizard and click or create a new site and click .
- Within the Site Properties window, select the tab.
- Click on the Synchronise with the following device tick box.
Screenshotmacro Border false URL http://docs.tri-line.com:8090/download/attachments/12158183/cisco_ucme_3.png - In the Host field enter in the IP Address of your UCME / UC500.
- In the Username field enter in the username to login to your UCME / UC500.
- Click on the button and enter the password used to login to the UCME / UC500, followed by clicking .
- Finally, click on the button.
Configuring TIM Plus to receive FTP
Below you will find steps on how to configure TIM Plus to receive data from your Cisco UCM:
- Browse to TIM Plus as normal and login with your credentials.
- Click on the tab.
- Select the site configured during the setup wizard and click .