Siemens HiCom/HiPath - IP connection

...

Configuring your SMDR output

The Siemens The Siemens HiCom/HiPath phone system sends SMDR information via a serial connection. You will need to directly connect a serial cable from the Siemens HiCom/HiPath phone system to the PC that NetPBX is installed and running on.For more information about the output and configuration of your SMDR data, please contact your phone maintainerdoesn't have the SMDR output enabled by default. Please contact your phone maintainer to enable the output for incoming, outgoing and internal calls.

<a id="Configure TIM Plus"></a>

...

1. Click on the Directory tab.
2. Select the site configured during the setup wizard and clickProperties.
   

   Screenshotmacro
   Border false URL http://docs.tri-line.com:8090/download/attachments/12583460/siemens_hicom_hipath_1.png

3. Within the Site Properties window, select Siemens HiCom-HiPath from the PBX model drop-down list.
4. In the Connection method field select Listen for connections from PBX from the drop-down list.
5. Leave the Host field blank.
6. In the Port field enter in 9000.
7. Click on the Save button to apply the settings.