These instructions help you configure your SpliceCom Maximiser phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
| Pbxsummary |
|---|
| Supportfiles1 | SpliceCom Maximiser.TDT |
|---|
| Supportfiles2 | SpliceCom Maximiser.TDS |
|---|
| Connection | Active connection |
|---|
| RequiredTask1 | Configure the SMDR output |
|---|
| RequiredTask2 | Configure TIM Plus |
|---|
|
| HTML |
|---|
<a id="Configure the SMDR output"></a> |
Configuring the SMDR output
The SMDR output on the SpliceCom Maximiser is enabled by default, however, you will need to check with your system maintainer whether a
password has been set up in the phone system and if so, you will need to enter this in TIM Plus to enable the connection.
| HTML |
|---|
<a id="Configure TIM Plus"></a> |
Configuring TIM Plus
Below you will find steps on how to configure TIM Plus to collect the SMDR data from your SpliceCom Maximiser:
- Browse to TIM Plus as normal and log in with your credentials.
- Click on the Directory tab.
- Select the site configured during the setup wizard and click Properties.
| Screenshotmacro |
|---|
| URL | http://docs.tri-line.com:8090/download/attachments/4817032/splicecom_maximiser_1.png |
|---|
|
- Within the Site Properties window, select SpliceCom Maximiser from the PBX model drop-down list.
- In the Connection method field, select Actively connect to PBX from the drop-down list.
- In the Host field, enter the IP address of your SpliceCom Maximiser.
- In the Port field, enter 4001.
- Leave the Username field blank.
- Leave the Password field blank, unless you've set up a Call logging password in your phone system.
- In the Connection script field, select SpliceCom Maximiser from the drop-down list.
- Click on the Save button to apply the changes.