BT Versatility

These instructions should assist in configuring your BT help you configure your BT Versatility to work with TIM Plus. If  Contact your system maintainer if you are not familiar with PBX the configuration , please contact your system maintainerof your PBX.

...

Configuring your SMDR output

These instructions should assist in configuring your BT Versatility to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.

The interface to the printer or PC should be serial V24/RS232-C and should meet the following specificationsThe BT Versatility outputs its SMDR data by serial V24/RS232 port.  The default communications parameters for this serial connection are: Speed – 4800, 9600, 19200, 38400 or 115,200 115200 bps. ; Data - 8 bits (no parity). The BT Versatility ; Parity - None.

The phone system has an in-built buffer to store the last 500 call records in the case of the receiving equipment becoming disconnected. This buffer can be output to the serial port as required . This option is selected in the and is enabled during system programming. An X-on ON/X-off OFF signal can be enabled which allows to allow the switch Versatility to detect if a device on the serial port, which supports X-on X-off is receiving the data. Another option allows compatible device is receiving its SMDR data successfully.  The Versatility can also be set to output SMDR data using "restricted call logging", whereby the last four digits of the any dialled number to be is masked. This is 'Restricted call logging'.

 Use the following documents as a guide to configuring your BT Versatility with TIM Plus:

<a id="Install NetPBX"></a>

Installing NetPBX

The BT Versatility phone system sends SMDR information via a serial connection. To collect the SMDR data from the serial port of the Versatility and send it to TIM Plus, you will first need to install the NetPBX software. For setup instructions, click on the link below:

...

Once NetPBX is configured and collecting data, log on in to TIM Plus as usual and apply follow the following settingssteps below:

1. Click on the Directory tab.
2. Select Choose the site configured during the setup wizard and clickyou want to configure and click  Properties.
   

   Screenshotmacro
   Border false URL http://docs.call-logger.com:8090/download/attachments/4817052/bt_versatility_4.png

3. Within In the Site Properties window, select BT Versatility from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Cliick on the Save button to apply the settings.

...