Samsung DCS

...

Follow the instructions below to configure your Samsung DCS to output SMDR data  to TIM Plus. You need to do this  The configuration needs to be performed from a LCD handset.

1. Open

   Referencemacro
   Label Programming

   and select 725.

2. Program each option as stated presented below:

   SMDR field	Value
   Page Header	Yes
   Lines per page	1
   Incoming Call	Yes
   Outgoing Call	Yes
   Authorise Code	Yes
   SMDR Start Time	Yes
   In/Out Group	No
   DND Calls	No
   Wake-Up Calls	No
   Directory Names	None
   Caller ID Data	Yes
   Abandoned Call	Yes
   No of Dial Mask	00
   DID Num/Name	Yes

3. Next, press the SPKR key .Select and select 804.
4. Dial 0 and use the arrow keys and to select SMDR.
5. Press the TRSF key to complete the configuration.

<a id="Install NetPBX"></a>

...

The Samsung DCS phone system sends SMDR information data via a serial connection. To collect the data from the serial port and send it to TIM Plus, you will first need to install the NetPBX software. For setup instructions, click on the link below:

...

Once NetPBX is configured and collecting data, log on in to TIM Plus as usual and apply perform the following settingssteps below:

1. Click on the Directory tab.
2. Select Choose the site configured during the setup wizard you want to configure and clickProperties.
   

   Screenshotmacro
   Border false URL http://docs.tri-line.com:8090/download/attachments/4817089/samsung_dcs_1.png

3. Within In the Site Properties window, select Samsung DCS from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to apply the settings.

...