...
| Step | IOS commands | Description |
|---|---|---|
| 1 | enable | Causes the UCME to enter EXEC mode. Type your EXEC password if requested |
| 2 | conf t | Enters the global configuration mode |
| 3 | aaa new-model | Enables aaa accounting mode |
| aaa accounting connection h323 start-stop group RADIUS | ||
| gw-accounting aaa | ||
| acct-template callhistory-detail | ||
| 4 | RADIUS-server host 192.168.0.1 auth-port 0 acct-port 1612 | Specifies the IP address and port of TIM Plus's RADIUS, to which CDR data will be sent, e.g. 192.168.0.1:1612 |
| 5 | RADIUS-server key C1sco | Specifies a RADIUS authentication secret that will be used by TIM Plus (configured in the next section), e.g. C1sco |
| 6 | RADIUS-server vsa send accounting | Enables VSA events |
| 7 | end | Exits configuration mode |
| 8 | wr | Saves the changes |
| HTML |
|---|
<a id="Configure Cisco AXL sync"></a> |
Configuring Cisco AXL sync
...
- Click on the tab.
- Go to the Directory level where you want the synched files to be created and add a new Directory Sync object. Enter a name for the object and click on the button, as shown below:
Screenshotmacro Border false URL /download/attachments/13271095/cisco_ucme_6.png - Left-click on the newly-created object and select .
- In the Directory type drop-down list, select Cisco UCME.
- In the Host name field, enter the IP address of your UCME.
- In the Host port field, enter the port number of the IOS service, e.g. 23 .
- In the Username field, enter the username of the IOS login that can perform synchronisation.
Screenshotmacro Border false URL /download/attachments/13271095/cisco_ucme_3.png - Click on button and enter the password of the IOS login that can perform synchronisation.
Screenshotmacro Border false URL /download/attachments/13271095/cisco_ucme_4.png - Click on the button to apply the changes.
| HTML |
|---|
<a id="Configure TIM Enterprise to capture RADIUS packets"></a> |
Configuring TIM Plus to capture RADIUS packets
Follow the steps below to configure TIM Plus to receive RADIUS data from your UCME:
- Click on the tab.
- Choose the PBX object you want to configure and click Properties.
- A new window will open. In the tab, select Cisco UCME - RADIUS from the Data format list and tick the Keep a local backup of data box, as shown below:
Screenshotmacro Border false URL /download/attachments/13271095/cisco_ucme_5.png - In the tab, select RADIUS connection from the Connection method list.
- In the Client IP field, enter the IP address of your UCME.
- In the Secret key field, enter the RADIUS-server key you configured on your UCME in the section above, e.g. C1sco.
Screenshotmacro - Click on the button to apply the settings.