LG GDK

<p>These instructions should assist in configuring your LG GDK to 
work with TIM EnterprisePlus. If you are not familiar with PBX 
configuration, please contact your system maintainer.</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=158>Connection information</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Connection type</b></td>
			<td class="confluenceTd"><b>Serial Output: </b>
				As the LG GDK sends SMDR information via a serial connection which is located on LG GDK unit itself. You will need to directly connect a serial cable from the LG GDK to the PC that NetPBX is installed and 
				running on.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Cable configuration</b></td>
			<td class="confluenceTd">Null-modem/Crossover.
			</td>
		</tr>
	</tbody>
</table>

<p>The LG GDK by default has the SMDR output disabled. For the SMDR to be outputted you will need to speak to your LG GDK maintainer. They will need to enable SMDR logs for outgoing, incoming and abandoned calls.</p>

<h2>Configuring TIM Enterprise<Plus</h2>

<p>Below you will find steps on how to configure TIM EnterprisePlus to listen for SMDR data from your LG GDK:</p>

<ol>
	<li>Browse to TIM EnterprisePlus as normal and login with your credentials.</li>
	<li>Click on the <span class="button no_margin">Directory</span> tab.</li>
	<li>Go<li>Click theon the pointsite inconfigured the Directory where you need to add during the PBXsetup Objectwizard and add a PBX with the name 'LG GDK'.</li>
	<li>Left-click on it and select <span class="button no_margin">Properties</span>.</li>
	<li>From the span>or create a new site and click <span class="button no_margin">General<>Properties</span> settings tab select <span class="keyword">LG GDK</span> from the PBX model list.</li>
	<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterpriseplus/pbx/lg_gdk_1.png" alt="LG GDK" />
	<li>In<li>Within the <span class="button no_margin">Connection<reference">Site Properties</span> tabwindow, select <span class="keyword">No>Aastra connection required<BP</span> from the <span class="reference">PBX model</span> drop-down list.</li>
	<li>In the <span class="reference">Connection method</span> field select <span class="keyword">No connection required</span> from the drop-down list.</li>
	<li>Finally, click on the <span class="button no_margin">Save</span> button.</li>
	<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/pbx/lg_gdk_2.png" alt="LG GDK" /></ol>