These instructions help you configure your SpliceCom your Splicecom Maximiser phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
...
| HTML |
|---|
<a id="Configure the SMDR output"></a> |
Configuring the SMDR output
The SMDR output on the SpliceCom By default, the call logging output of the Splicecom Maximiser is enabled by default, however, you will need to check with your system maintainer whether a keywordmacroand you do not normally require a password to obtain it. To protect your call logging data, you can set a
| Referencemacro |
|---|
| Label | Call Logging Password |
|---|
|
password has been set up in the phone system and if so, you will in the screen of your Maximiser's web management interface. If you decide to set a password, you need to enter this
in when configuring TIM Plus
to enable the connection.(below).| Info |
|---|
Your system maintainer may have already set a call logging password for you. |
| HTML |
|---|
<a id="Configure TIM Plus"></a> |
Configuring TIM Plus
Below you will find steps on how Follow the steps below to configure TIM Plus to collect the SMDR call logging data from your SpliceCom Splicecom Maximiser:
- Browse to TIM Plus as normal and log in with your credentials.
- Click on the Directory tab.
- Select Choose the site configured during the setup wizard and click you want to configure and click Properties.
| Screenshotmacro |
|---|
| URL | http://docs.tri-line.com:8090/download/attachments/4817032/splicecom_maximiser_1.png |
|---|
|
- Within In the Site Properties window, select SpliceCom Splicecom Maximiser from the PBX model drop-down list.
- In the Connection method field, select Actively connect to PBX from the drop-down list.
- In the Host field, enter the IP address of your SpliceCom Splicecom Maximiser.
- In the Port field, enter 4001.
- Leave the Username field blank.Leave the Password field blank, unless you've set up a Call logging password in your phone system
- If your Maximiser has a
| Referencemacro |
|---|
| Label | call logging password |
|---|
|
set, enter it in the Password field; if not, leave it blank.
- In the Connection script field, select SpliceCom Splicecom Maximiser from the drop-down list.
- Click on the Save button to apply the changes.