These instructions help you configure your Mitel SX50 SX2000 phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
| Pbxsummary | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| HTML |
|---|
<a id="Configure the SMDR output"></a> |
Configuring your SMDR output
The Mitel
...
SX2000 phone system sends SMDR information via a serial connection. You
...
need to directly connect a serial cable from
...
your Mitel
...
to the PC that
...
netpbx is installed and running on.
...
By default,
...
the
...
SMDR output of your Mitel is not enabled.
...
For more information about enabling and configuring the SMDR output
...
, you should speak to your system maintainer.
| HTML |
|---|
<a id="infoInstall NetPBX"></a> |
Installing NetPBX
To collect
...
call logging data from the serial port of your Mitel and send it to TIM Plus, you
...
first need to install the NetPBX software. For setup instructions, click on the link below:
| HTML |
|---|
<a id="Configure TIM Plus"></a> |
Configuring TIM Plus
Once NetPBX is configured and collecting data, log on in to TIM Plus as usual and apply perform the following settingssteps below:
- Click on the tab.Select
- Choose the site configured during the setup wizard and clickyou want to configure and click .
...
Screenshotmacro Border false URL /download/attachments/4817066/mitel_sx2000_1.png
...
- In the Site Properties window, select Mitel SX2000 from the PBX model drop-down list.
- In the Connection method field, select No connection required from the drop-down list.
- Click on the button to apply the settings.