...

<a id="Overview"></a>

Overview

To configure a site, go to the Directory screen, select the site you want to configure and click on the Properties button at the top-right of the panel, as shown below:

...

All the tabs Each tab in the

<a id="PBX"></a>

PBX

The

...

For all connection types

...

For listening connections

...

For active connections

For FTP

...

transfer connections

For DSN

...

connections

...

For RADIUS connections

For SysLog

...

connections

<a id="Options"></a>

Options

The 

Save a backup of any data received from this PBX

TIM Plus allows you to save a backup of the any call logging data received from the your telephone system in case this requires to be reprocessed at a later stage, e.g. your database becomes corrupt or someone accidentally deletes calls from the system.(s).

To enable the backupbackups, tick the 

Timestamp received data

If TIM Plus can timestamp call records from your telephone system doesn't output the date and time in the CDR data, tick this option to timestamp the dataas they are received, if they do not already include dates and times.

Binary data

Tick Select this option if your telephone system sends its CDR data in binary format, e.g. ISDX telephone system. When the

Delay processing of received data

This option is used when the switch-network-PC connection is very slow, and, in order to ensure all data is received before processing, TIM Plus can be set to wait x milliseconds before it attempts to process this dataEnable this option and enter a time delay, in milliseconds, if call records are sent from your telephone system over a slow connection. This helps to prevent data loss when call records are processed before they are fully received.

<a id="Inactivity"></a>

Inactivity

The

Enable inactivity timer

This Select this option allows you to enable the inactivity alert and decide how long you want to wait for a call before activating the timer. To send the alert as inactivity monitoring for the site you are configuring. Enter the amount of time, in minutes, that must pass with no call activity, before an e-mail notificationis sent. Next, enter the e-mail address in the box providedthat will receive inactivity alerts for this site.

Reset connection on inactivity

You can tick this box to automatically TIM Plus can reset the network connection to the your telephone system , after the inactivity timer has been activatedwhen an inactivity alert is sent, in order to cause the telephone system to restart its connection.

Exclude days and hours from inactivity monitoring

Tick the box alongside the days and hours when it is legitimate that no call activity is expected, e.g. nights or weekends, so you don't receive an e-mail notification takes place, such as at night or at weekends, so as not to receive unnecessary e-mail notifications for those periods.

<a id="LCR"></a>

LCR

The 

Adding LCR codes

To add an LCR code, enter the number it in the LCR digits field and select the route it takes its associated tariff table from the drop-down list, as shown above.

Removing LCR codes

To remove an LCR code, click on the icon alongside the codeit.

<a id="Tariff"></a>

Tariff

The

...

...

...

<a id="Alarms"></a>

Alarms

In order to monitor specific events on the system, TIM Plus gives you the option to set up alarms that trigger when certain criteria are met, e.g. when calls above a certain duration are made, when specific numbers are dialled or when defined cost-TIM Plus can send e-mail alerts when calls whose properties match certain criteria have happened, such as calls above a particular duration, calls to specific phone numbers, or when user-defined cost thresholds are exceeded.

Dialled number alarm

Alarms An alarm can be set to activate activated when a part full or full partial number is dialled. If you want to To add a series of full or partial numbers, you can separate each entry one with a comma, as shown above. Acceptable formats include: An example might be 

Cost alarm

An alarm can be set to activate activated when a call exceeds a pre-set cost. Note that the cost will relate to the local currency, e.g. in the screenshot above, the 

Duration alarm

An alarm can be activated when a call exceeds a predetermined duration, measured specified in seconds.

Missed call alarm

An alarm for E-mail notifications of missed calls can also be set up on the systemactivated, by ticking the box Enable missed call alarms for this site option.

Delivering the alarm notification

To receive an e-mail notification from TIM Plus about any of the above alarm notifications from TIM Plus, type the aforementioned alarms, enter the address of the e-mail address recipient in the text box provided, as shown above. To send the alarm to more than one e-mail address; to send alerts to multiple email addresses, separate each entry one with a commasemicolon.