You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions should assist in configuring your BT Versatility to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.
| Connection information | Description |
|---|---|
| Connection type | Serial Output: The BT Versatility sends Call Logging information via a serial connection. The BT Versatility has a V24 port on the CCU. The connection itself is RJ11 and you will need to purchase a V24 module from your system supplier/maintainer. You need to directly connect a serial cable from the V24 module to the PC that NetPBX/TIM Enterprise is installed and running on. |
| Cable configuration | Straight-through. |
These instructions should assist in configuring your BT Versatility to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.
The interface to the printer or PC should be serial V24/RS232-C and should meet the following specifications: Speed – 4800, 9600, 19200, 38400 or 115,200 bps. Data - 8 bits (no parity).
The BT Versatility has an in-built buffer to store the last 500 call records. This buffer can be output to the serial port as required. This option is selected in the system programming.
An X-on X-off signal can be enabled which allows the switch to detect if a device on the serial port, which supports X-on X-off is receiving the data.
Another option allows the last four digits of the dialled number to be masked. This is 'Restricted call logging'.
Configuring your BT Versatility
Configuring TIM Enterprise
Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your BT Versatility:
- Browse to TIM Enterprise as normal and login with your credentials.
- Click on the tab.
- Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'BT Versatility'.
- Left-click on it and select .
- From the settings tab select BT Versatility from the PBX model list.
- In the tab select No connection required from the Connection method list.
- Finally, click on the button.
