Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History
<< Previous Version 7 Next >>

Connection Type
  TIM Plus establishes a TCP connection to this PBX.

Support Files
  Cisco RADIUS-UCME.TDT
  Cisco RADIUS-UCME.TDS
Required Tasks
  $paramRequiredTask1

These instructions should assist in configuring your AGFEO AC-AS Series to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information Description
Connection type Serial Output: AGFEO AC-AS Series PBX sends SMDR information via a serial connection. You will need to directly connect a serial cable from the AGFEO AC-AS Series to the PC that NetPBX is installed and running on.
Cable configuration Straight-through.

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to listen for SMDR data from your AGFEO AC-AS Series:

  1. Browse to TIM Plus as normal and login with your credentials.
  2. Click on the Directory tab.
  3. Click on the site configured during the setup wizard and click Properties or create a new site and click Properties.
    4. AGFEO
  4. Within the Site Properties window, select AGFEO from the PBX model drop-down list.
  5. In the Connection method field select No connection required from the drop-down list.
  6. Finally, click on the Save button.
Labels:
None
Edit Labels