Aastra MX-ONE

These instructions help you configure your Aastra MX-ONE phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

TIM Plus establishes a serial connection with this PBX.

Support Files

Aastra MX-ONE BC10.TDT

Aastra MX-ONE BC10.TDS

Required Tasks

$paramRequiredTask1

For your SMDR configuration, Aastra MX-ONE has multiple output formats. TIM Plus requires the SMDR format to be set to BC8, BC10 or BC13

Configuring TIM Plus

These instructions should assist in configuring your Aastra MX-ONE to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information	Description
Connection type	Serial Output: The Aastra MX-ONE sends SMDR information via a serial connection which is located on Aastra MX-ONE unit itself. You will need to directly connect a serial cable from the Aastra MX-ONE to the PC that NetPBX is installed and running on.
Cable configuration	Null-modem/Crossover.

For your SMDR configuration, Aastra MX-ONE has multiple output formats. TIM Plus requires the SMDR format to be set to BC8 or BC10.

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Aastra MX-ONE BC10:

Browse to TIM Plus as normal and login with your credentials.
Click on the Directory tab.
Click on the site configured during the setup wizard and click Properties or create a new site and click Properties.

Within the Site Properties window, select Aastra MX-ONE BC10 from the PBX model drop-down list.
In the Connection method field select No connection required from the drop-down list.
Finally, click on the Save button.