Alcatel 4400e

These instructions help you configure your Alcatel 4400e phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

TIM Plus establishes a serial connection with this PBX.

Support Files

Alcatel 4400E.TDT

Required Tasks

$paramRequiredTask1

Configuring your SMDR

The Alcatel 4400e will need to be configured to output SMDR information.

See table below for a summary of data output from Alcatel 4400e:

Configuring TIM Plus

Download the interface files

Visit Tri-Line's Gateway and download the interface files, as shown below:

These instructions should assist in configuring your Alcatel 4400e to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information	Description
Connection type	Serial Output: The Alcatel 4400e sends SMDR information via a serial connection. The most recents units will have a .v24 port, older units will require you to purchase a .v24 module. You will need to directly connect a serial cable from the Alcatel 4400e .v24 module to the PC that NetPBX is installed and running on.
Cable configuration	Straight-through.

Configuring your SMDR

The Alcatel 4400e will need to be configured to output SMDR information.

See table below for a summary of data output from Alcatel 4400e:

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Alcatel 4400e:

Browse to TIM Plus as normal and login with your credentials.
Click on the Directory tab.
Click on the site configured during the setup wizard and click Properties or create a new site and click Properties.

Within the Site Properties window, select Alcatel 4400e from the PBX model drop-down list.
In the Connection method field select No connection required from the drop-down list.
Finally, click on the Save button.