LG GDK

These instructions help you configure your Iridiacom Telrad phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

TIM Plus establishes a serial connection with this PBX.

Support Files

LG IPLDK.TDT

LG IPLDK.TDS

Required Tasks

$paramRequiredTask1

These instructions should assist in configuring your LG GDK to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information	Description
Connection type	Serial Output: As the LG GDK sends SMDR information via a serial connection which is located on LG GDK unit itself. You will need to directly connect a serial cable from the LG GDK to the PC that NetPBX is installed and running on.
Cable configuration	Null-modem/Crossover.

The LG GDK by default has the SMDR output disabled. For the SMDR to be outputted you will need to speak to your LG GDK maintainer. They will need to enable SMDR logs for outgoing, incoming and abandoned calls.

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to listen for SMDR data from your LG GDK:

Browse to TIM Plus as normal and login with your credentials.
Click on the Directory tab.
Click on the site configured during the setup wizard and click Propertiesor create a new site and click Properties.

Within the Site Properties window, select LG GDK from the PBX model drop-down list.
In the Connection method field select No connection required from the drop-down list.
Finally, click on the Save button.