You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your Aastra MX-ONE phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Plus establishes a serial connection with this PBX.
Support Files
Aastra MX-ONE BC10.TDT
Aastra MX-ONE BC10.TDS
Required Tasks
$paramRequiredTask1
Configuring your SMDR
Aastra MX-ONE supports multiple output formats for the SMDR configuration. TIM Plus requires the SMDR format to be set to BC8, BC10 or BC13. For more information on how to configure the data output, please contact your phone maintainer.
Installing NetPBX
The Aastra MX-ONE phone system sends SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Plus, you will first need to install NetPBX software. For setup instructions, click on the link below:
Configuring TIM Plus
Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:
- Click on the tab.
- Click on the site configured during the setup wizard and click or create a new site and click .
- Within the Site Properties window, select AGFEO from the PBX model drop-down list.
- In the Connection method field select No connection required from the drop-down list.
- Finally, click on the button to apply the settings.
These instructions should assist in configuring your Aastra MX-ONE to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.
| Connection information | Description |
|---|---|
| Connection type | Serial Output: The Aastra MX-ONE sends SMDR information via a serial connection which is located on Aastra MX-ONE unit itself. You will need to directly connect a serial cable from the Aastra MX-ONE to the PC that NetPBX is installed and running on. |
| Cable configuration | Null-modem/Crossover. |
For your SMDR configuration, Aastra MX-ONE has multiple output formats. TIM Plus requires the SMDR format to be set to BC8 or BC10.
Configuring TIM Plus
Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Aastra MX-ONE BC10:
- Browse to TIM Plus as normal and login with your credentials.
- Click on the tab.
- Click on the site configured during the setup wizard and click or create a new site and click .
- Within the Site Properties window, select Aastra MX-ONE BC10 from the PBX model drop-down list.
- In the Connection method field select No connection required from the drop-down list.
- Finally, click on the button.
