Avaya Matra 65xx series

These instructions help you configure your Avaya Matra 65xx series to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Plus establishes a serial connection with this PBX.

Support Files

  Avaya Matra 6500.TDT
  Avaya Matra 6500.TDS

Required Tasks

  Configure the SMDR output
  Install NetPBX
  Configure TIM Plus

Configuring your SMDR output

The Avaya Matra 65xx series is outputting the SMDR data via a serial connection. You will need to directly connect a serial cable from the Avaya Matra phone system to a PC that will be running NetPBX software.

For more information about the output and configuration of the SMDR data, please contact your phone maintainer.

Installing NetPBX

To collect the data from the serial port and send it to TIM Plus, you will first need to install NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:

1. Click on the Directory tab.
2. Click on the site configured during the setup wizard and clickProperties.
   
   
3. Within the Site Properties window, select Avaya Matra 6500 from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to apply the settings.