LG GDK

These instructions help you configure your LG GDK phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Plus establishes a serial connection with this PBX.

Support Files

  LG GDK.TDT
  LG.TDS

Required Tasks

  Configure the SMDR outpu
  Install NetPBX
  Configure TIM Plus

Configuring your SMDR output

The LG GDK phone system sends SMDR information via a serial connection. You will need to directly connect a serial cable from the LG GDK phone system to the PC that NetPBX is installed and running on.

However, the LG GDK doesn't have SMDR output enabled by defalut, so you will need to speak with your phone maintainer to enable the SMDR logs for outgoing, incoming and abandoned calls.

Installing NetPBX

The LG GDK phone system sends SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Plus, you will first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:

1. Click on the Directory tab.
2. Select the site configured during the setup wizard and clickProperties.
   
   
3. Within the Site Properties window, select LG GDK from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to apply the settings.