You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your LG iPECS phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Plus establishes a serial connection with this PBX.
Support Files
LG iPECS.TDT
LG.TDS
Required Tasks
Configure the SMDR output
Install NetPBX
Configure TIM Plus
Configure the SMDR output
The LG iPECS by default has SMDR output disabled. Below you will find the programming number codes and the fields that need to be configured.
SMDR Attributes (PGM 177)
Within this window you need to set Info/On-line SMDR to Telnet 1. This will allow TIM Plus to connect to the LG iPECS on TCP port 23 to receive SMDR data.
Below is an example of the SMDR Attributes window:
Printer Port Selection (PGM 175)
Below is an example of the Programming Port Selection window:
Installing NetPBX
If your LG iPECS has been configured to send SMDR data via a serial connection, you will first need to install NetPBX software to collect the data from the serial port and send it to Tim Plus. For setup instructions, click on the link below:
Configuring TIM Plus
Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:
- Click on the tab.
- Click on the site configured during the setup wizard and click .
- Within the Site Properties window, select LG iPECS from the PBX model drop-down list.
- In the Connection method field, select No connection required from the drop-down list.
- Click on the button to apply the settings.