Panasonic KX-TDA/E - IP connection

These instructions help you configure your Panasonic KX-TDA/E phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Plus establishes a TCP connection to this PBX.

Support Files

  Panasonic KX Family.TDT
  Panasonic KX Family.TDS

Required Tasks

  Configure the SMDR output
  Install NetPBX
  Configure TIM Plus

Configuring your SMDR

Below you will find instructions on how to configure your Panasonic KX-TDA/E to output SMDR to TIM Plus. You will need to do this from the Panasonic Maintenance Console program:

1. Login to the Panasonic Maintenance Console program.
2. On the left-hand side click on 11.Maintenance.
3. Now on the right-hand side you will see the SMDR options which you can configure by clicking on the SMDR tab, as shown below:
   
   
4. Now click on SMDR Options tab and configure the options as below:
   
   
5. Now click on the Apply button and then the OK button.

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to connect to your NEC SV8100 phone system:

1. Log on to TIM Plus as usual and click on the Directory tab.
2. Click on the site configured during the setup wizard and click Properties.
   
   
3. Within the Site Properties window, select Panasonic KX Family from the PBX model drop-down list.
4. In the Connection method field select Actively connect to PBX from the drop-down list.
5. In the Host field enter the IP Address of your Panasonic KX-TDA/E.
6. In the Port field enter in 2300.
7. Leave the Username and Password fields blank.
8. In the Connection script field select Panasonic from the drop-down list.
9. Finally, click on the Save button to apply the settings.