You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions should assist in configuring your Siemens OpenOffice to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.
Connection information | Description |
---|---|
Connection type | IP |
IP method | TCP/IP connection: The Siemens OpenOffice requires TIM Plus to connect to it and collect SMDR data via its 'HTTPS' interface. TIM Plus will perform 'GET' and 'POST' methods to retrieve the SMDR data. The actual installation of TIM Plus can be anywhere on the network that the PBX is connected to. |
For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.
Configuring TIM Plus
You will need to setup a DSN connection for TIM Plus to work with the Siemens OpenOffice. Below you will find instructions on how to do this within Microsoft Windows:
- Click on Windows .
- Click on .
- Double click on icon.
- Double click on icon.
- Click on the tab.
- Click on the button.
- Select Native from the list and click .
- In the Data source name field enter the following: Siemens OpenOffice.
- Click on the button and then again to close the window.
Now you will be able to see the Siemens OpenOffice in the list.
An example of ODBC setup is shown below:
Below you will find steps on how to configure TIM Plus to use the DSN connection that has just been setup:
- Browse to TIM Plus as normal and login with your credentials.
- Click on the tab.
- Click on the site configured during the setup wizard and click or create a new site and click .
- Within the Site Properties window, select Siemens OpenOffice from the PBX model drop-down list.
- In the Connection method field select Connect to a system DSN from the drop-down list.
- In the DSN name field select Siemens OpenOffice from the drop-down list.
- In the Frequency field enter in 5.
- In the DB script field select Siemens OpenOffice from the drop-down list.
- Finally, click on the button.
Labels: