Alcatel OmniPCX Enterprise - IP connection

These instructions help you configure your Alcatel OmniPCX Enterprise phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Plus establishes a TCP connection to this PBX.

Support Files

  Alcatel OmniPCX Enterprise.TDT
  Alcatel OmniPCX Enterprise.TDS

Required Tasks

  Configure the SMDR output
  Configure TIM Plus

Configuring your SMDR output

Follow the instructions below to configure the SMDR output via an IP connection. These instructions are taken from the Alcatel OmniPCX Enterprise manual:

Connect to your PBX via telnet and follow the steps below:

1. Applications (Enter)
2. Accounting (Enter)
3. Review/Modify (Enter)
4. All Instance (F1)
5. Realtime ticket Output: Set this to ethernet. Note that if you don't have appropriate license, you can only select V24 (serial) here.
6. Save changes and exit

The table below presents a summary of data output from Alcatel:

Configuring TIM Plus

Follow the steps below to configure TIM Plus to collect the SMDR data from your Alcatel OmniPCX Enterprise:

1. Click on the Directory tab.
2. Select the site you configured during the setup wizard and click Properties.
   
   
3. Within the Site Properties window, select Alcatel OmniPCX Enterprise from the PBX model drop-down list.
4. In the Connection method field, select Actively connect to PBX from the drop-down list.
5. In the Host field, enter the IP address of your Alcatel OmniPCX Enterprise.
6. In the Port field, enter 2533 as the default port number for this PBX.
7. Leave the Username and Password fields blank.
8. In the Connection script field, select Alcatel OmniPCX Enterprise 7.1+ from the drop-down list.
9. Click on the Save button to apply the changes.