You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
To limit the results of your report, choose one or more of the following filters:
Account code
If you want to produce a bill consisting of only chargeable calls that were made using a particular account code, enter the account code in the field provided.
To report on more than one account code, separate each code using a comma.
Call type
This filter allows you to define the type of call you want to report on, in terms of where the call originated and where it was delivered, e.g. incoming, outgoing, internal, etc. To report on all types of call, set this to All calls.
Carrier
If you use more than one carrier, you can limit the results to include only calls that were made using a specific carrier.
 | If you use only one carrier, there will be no drop-down list available and no option to choose a carrier. |
CLI
Calling Line Identification (CLI) is the telephone number of the remote caller in an incoming call scenario.
You can report on calls that originate from a specific CLI or those whose CLI matches a particular pattern of digits. For example, to report on all incoming calls from Tri-Line, you could enter 02072652600.
You can use the ! symbol to explicitly exclude a CLI from the report's results, and/or the * symbol as a wildcard in digit pattern matching. For example, to exclude calls from Tri-Line, but include all others, you could use !020726526*. To report on more than one CLI, use a comma to separate each entry.
Cost
You can define a cost filter to include calls above or below specific values by entering your criteria, as shown below:
You can specify a cost range by using the - symbol; to specify limits, use the comparison operators, >, <, and ! .
Destination
If you want to filter calls to a specific, known destination, type the name of the destination in the text box provided. This filter accepts the ! and * symbols for excluding values and specifying partial matches, respectively.
For example, if you wanted to exclude all calls to France, you could enter !France*, as shown below:
Dialled number
To filter calls to a specific dialled number, type it in the text box provided. The dialled number is defined as the number that is dialled (in the case of an outbound call), or the DDI number that the remote party dialled to reach a particular extension or group (in the case of an inbound call).
To filter calls to a specific area, a partial number can be entered (e.g. 0033 for calls to France).
You can use the ! symbol to explicitly exclude a dialled number from the report's results, and/or the * symbol as a wildcard in digit pattern matching. For example, to exclude calls to Tri-Line, but include all others, you could use !020726526*). To report on more than one dialled number, use a comma to separate each entry.
Duration
To filter calls above or below a particular duration, enter the desired duration in seconds.
You can specify a duration range by using the - symbol; to specify limits, use the comparison operators, >, <, and ! .
In the above example, the report will return only calls longer than 1800 seconds (30 minutes).
LCR code
To filter your results to include only calls that used a Least Cost Routing (LCR) code, enter it in the text box provided.
You can use the ! symbol to explicitly exclude a LCR code from the report's results, and/or the * symbol as a wildcard in digit pattern matching. For example, to exclude calls made using all LCR codes beginning 162, you could enter !162*. To report on more than one LCR code, use a comma to separate each entry.
Response
This option allows you to filter calls based on their response time, measured in seconds. Specify the desired response time threshold in the text box provided.
In the above example, the search results will display calls that have a response time greater than 10 seconds.
You can specify a response time range by using the - symbol and; to specify limits, use the comparison operators, >, <, and ! .
Start time
This option allows you to filter calls based on the time the call started. Specify the start time in the text box provided using the hh:mm:ss format.
For example, to include only calls that began after 10 am, you could enter 10:00:00 in the Start time field, as shown below:
Trunk access code
If your telephone system uses trunk access codes to connect calls using specific channels, you can limit your report's results to include only calls made using those codes. Specify the trunk access code in the text box provided.
You can use the ! symbol to explicitly exclude a trunk access code from the report's results, and/or the * symbol as a wildcard in digit pattern matching. For example, to exclude calls made using the 9 trunk access code, you could enter !9. To report on more than one trunk access code, use a comma to separate each entry.
Run or schedule the report
To run or schedule the report without setting any further parameters, select the button; to apply further settings, click on the button, which will direct you to the Options section of the report wizard.