Panasonic ICX/S-ICX

These instructions help you configure your Panasonic ICX/S-ICX phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

TIM Enterprise establishes a serial connection with this PBX.

Support Files

Panasonic ICX.TDT

Required Tasks

Configure the SMDR output

Install NetPBX

Configure TIM Enterprise

These instructions should assist in configuring your Panasonic ICX/S-ICX to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information	Description
Connection type	Serial Output: Panasonic ICX/S-ICX sends SMDR information via a serial connection. You will need to directly connect a serial cable from the Panasonic ICX/S-ICX PBX to the PC that NetPBX is installed and running on.
Cable configuration	Null-Modem/Crossover.

For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Panasonic ICX/S-ICX:

Browse to TIM Enterprise as normal and login with your credentials.
Click on the Directory tab.
Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Panasonic ICX/S-ICX'.
Left-click on it and select Properties.
From the General settings tab select Panasonic ICX/S-ICX from the PBX model list.

In the Connection tab select No connection required from the Connection method list.
Finally, click on the Save button.