These instructions help you configure your Draytek phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Enterprise captures SysLog packets from this PBX.

Support Files

  Draytek.TDT
  Draytek.TDS

Required Tasks

  Configure your router
  Configure TIM Plus

Configuring your router

Follow the steps below to enable SysLog events on your phone system:

1. Access the web interface of your DrayTek router and navigate to System Maintenance >> SysLog/Mail Alert Setup , as shown below:
   
   
2. Check the Enable box to activate the SysLog fuction.
3. Check the  Syslog Server box to save the logs directly to the server.
4. Enter the IP address of TIM Enterprise's SysLog server, to which CDR data will be sent.
5. Check the Call Log box, to enable the output of call logging data.
6. Click on the OK button to save the settings.

Configuring TIM Enterprise

Follow the steps below to configure TIM Enterprise to receive SysLog data from your DrayTek phone system:

1. Click on the Directory tab.
2. Choose the site you want to configure and click Properties.
   
   
3. In the Site Properties window, select Draytek from the PBX model drop-down list.