You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your Aastra MX-ONE phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Plus listens for connections from this PBX.
Support Files
Aastra MX-ONE - BC13.TDT
Aastra MX-ONE - BC13.TDS
Required Tasks
Configure the SMDR output
Configure TIM Plus
Configuring your SMDR output
The MX-One phone system saves the call logging information into a local database, located by default in:
To edit the default path, SSH into each MX-One and use the mc command. You can use the mkdir (key 7) to configure the directory structure as required.
Next, you need to enter the following commands for the primary MX-One (the one that will send the data via IP to TIM Plus):
 | The server IP address specified in the above command will be the IP address of the TIM Plus machine. The port number can also be set to any number, although we recommend to use a 9000 range. |
Then, for the primary MX-One, add the following two commands to send the data:
For each additional MX-One in the cluster, the following commands need to be entered: