AYC Telecom

These instructions should assist in configuring your AYC Telecom IPcts to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Configuring your SMDR

Below you will find instructions on how to setup the SMDR output using the IPcts Management web page:

1. Browse and login to your AYC Telecom IPcts web page
2. Click on the 'System' tab
3. Click on the 'SMDR/Log' tab and configure the fields as below:
• SMDR Server Enabled: Please click on the check box
• SMDR Server Output: Click on the 'radio' button 'Network Address'
• SMDR Client IP Address: Enter in the IP address of the machine that TIM Enterprise is installed on
• SMDR Client Port: Enter the TCP port number that you want to send the 'SMDR' data to.  You can use any free TCP port, we would recommend starting from 9000 and increment it per PBX unit that you are going to send 'SMDR' data from to TIM Enterprise.
4. Click on the 'Update' button
5. Click on the 'Commit Changes' button at the top of the page

Below is an example screenshot of the SMDR screen from the AYC Telecom IPcts management web page:

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Aastra BP:

1. Browse to TIM Enterprise as normal and login with your credentials.
2. Click on the Directory tab.
3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Aastra BP'.
4. Left-click on it and select Properties.
5. From the General settings tab select Aastra BP from the PBX model list.

6. In the Connection tab select No connection required from the Connection method list.
7. Finally, click on the Save button.