You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions should assist in configuring your LG IPLDK to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.
| Connection information | Description |
|---|---|
| Connection type | Serial Output or IP: If you have configured the LG IPLDK to send the SMDR information via a serial connection, you will need to directly connect a serial cable from the LG IPLDK to the PC that NetPBX is installed and running on. |
| Cable configuration | Null-modem/Crossover. |
| IP method | If the LG IPLDK is configured to send the SMDR information via TCP/IP, the actual installation of TIM Enterprise can be anywhere on the network that the PBX is connected to. The LG IPLDK will need to be configured to output SMDR data via TCP/IP so TIM Enterprise can connect to it. TIM Enterprise will connect to the LG iPECS on TCP port 23. |
Configuring your SMDR
The LG IPLDK by default has SMDR output disabled. Below you will find the programming number codes and the fields that need to be configured.
Print Serial Port Selection (PGM 175)
Within this window you need set Info/On-line SMDR to Telnet 1. This will allow TIM Enterprise to connect to the LG IPLDK on TCP port 23 to receive SMDR data.
Below is an example Print Serial Port Selection window:
SMDR Attributes (PGM 177)
Below is an example SMDR Attributes window:
ISDN Attributes (PGM 200)
Below is an example ISDN Attributes window. Please note that the CLI Print to serial field needs to be enabled.
Configuring TIM Enterprise
Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your LG IPLDK:
- Browse to TIM Enterprise as normal and login with your credentials.
- Click on the tab.
- Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'LG IPLDK'.
- Left-click on it and select .
- From the settings tab select LG IPLDK from the PBX model list.
- In the tab select Establish TCP connection to PBX from the Connection method list.
- In the Host field enter the IP Address of your LG IPLDK.
- Leave Port field blank.
- Leave the Username field blank but enter the Password.
- In the IP script field select Generic Simple from the drop-down list.
- Finally, click on the button.
