SpliceCom Maximiser

These instructions should assist in configuring your SpliceCom Maximiser to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

By default the SMDR output on the SpliceCom Maximiser is enabled. Please check with your system maintainer if they have added a 'Call Logging' password. If they have, they will need to tell you what it is as TIM Enterprise will require it when it connects.

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to connect to your SpliceCom Maximiser to receive SMDR:

1. Browse to TIM Enterprise as normal and login with your credentials.
2. Click on the Directory tab.
3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'SpliceCom Maximiser'.
4. Left-click on it and select Properties.
5. From the General settings tab select SpliceCom Maximiser from the PBX model list.

6. In the Connection tab select Establish TCP connection to PBX from the Connection method list.
7. In the Host field enter the IP Address of your SpliceCom Maximiser.
8. In the Port field enter in 9000.
9. Leave the Username and Password fields blank.
10. Finally, click on the Save button.