Aastra Intelligate Series

These instructions should assist in configuring your Aastra Intelligate Series to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information	Description
Connection type	Serial Output or IP: If you have configured the Aastra Intelligate to send the SMDR information via a serial connection, you will need to directly connect a serial cable from the Aastra Intelligate to the PC that NetPBX is installed and running on.
Cable configuration	Null-modem/Crossover.
IP method	TCP/IP connection: If the Aastra Intelligate is configured to send the SMDR information via TCP/IP the actual installation of TIM Enterprise can be anywhere on the network that the PBX is connected to. The Aastra Intelligate will need to be configured to send the SMDR data to the IP address and TCP port that TIM Enetrprise is listening on.

For your SMDR configuration, please note that Aastra Intelligate Series has multiple output formats. For TIM Enterprise, the output will need to be configured to the PC5 format.

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Aastra Intelligate PC5:

Browse to TIM Enterprise as normal and login with your credentials.
Click on the Directory tab.
Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Aastra Intelligate PC5'.
Left-click on it and select Properties.
From the General settings tab select Aastra Intelligate PC5 from the PBX model list.

In the Connection tab select Listen for connection from PBX from the Connection method list.
In the Port field enter in 9000.
Finally, click on the Save button.