Samsung DCS

These instructions help you configure your Samsung DCS phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Configure the SMDR output"></a>

Configuring your SMDR output

Follow the instructions below to configure your Samsung DCS to output SMDR data  to TIM Plus. The configuration needs to be performed from a LCD handset.

1. Open

   Referencemacro
   Label Programming

   and select 725.

2. Program each option as presented below:

   SMDR field	Value
   Page Header	Yes
   Lines per page	1
   Incoming Call	Yes
   Outgoing Call	Yes
   Authorise Code	Yes
   SMDR Start Time	Yes
   In/Out Group	No
   DND Calls	No
   Wake-Up Calls	No
   Directory Names	None
   Caller ID Data	Yes
   Abandoned Call	Yes
   No of Dial Mask	00
   DID Num/Name	Yes

3. Next, press the SPKR key and select 804.
4. Dial 0 and use the arrow keys to select SMDR.
5. Press the TRSF key to complete the configuration.

<a id="Install NetPBX"></a>

Installing NetPBX

The Samsung DCS phone system sends SMDR data via a serial connection. To collect the data from the serial port and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log in to TIM Plus and perform the steps below:

1. Click on the Directory tab.
2. Choose the site you want to configure and clickProperties.
   

   Screenshotmacro
   Border false URL /download/attachments/4817089/samsung_dcs_1.png

3. In the Site Properties window, select Samsung DCS from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to apply the settings.